随着气温的降低，工业锅炉作为满足家用取暖需求的主要设备来说也逐渐进入到使用的高峰期中，但其实不管是现在还是之前工业锅炉的非运行期，都要学会正确操作设备，工业锅炉制造厂就是以此来保证设备进行运行期能够正常运行。
在工业锅炉非运行期的时候，工业锅炉制造厂建议用户将通至工业锅炉水阀门、燃气阀门、电源等一一关闭；而且这段时间不管是锅炉还是管道，都不需要泄水，但需要时刻关注到注水压力。
另外就是不要随意更改、拆卸工业锅炉的烟道；若是夏季要使用工业锅炉提供热水的话，可以将其调整到夏季模式，这样就可以只供应热水不供暖，但不要忘了将锅炉的出水温度设置好，在用水点处直接打开热水使用。
工业锅炉在非运行期的操作要点基本这些，而它在运行期的操作事项也都已经介绍过了，接下来要看看工业锅炉自身的一些配置，有哪些是不起眼但往往是十分重要，不可或缺的。
一个是工业锅炉的挡渣装置为，了不使炉渣落入炉排和延长炉渣在炉排上的留时间，链条炉排要装挡渣装置。还有一个是工业锅炉炉排的张紧装置，它是为了不使炉排在运行时拱起而设计的。
工业锅炉制造厂指出由于工业锅炉在运行过程中炉排须紧，所以张紧装置成了必不可少的配件之一，牟其中链带式依靠前轴、后轴将链条张紧，一般前轴是可调的；而横梁、鳞式则依靠自重张紧，使得炉排保持稳定的运行。
As the temperature drops, industrial boilers, as the main equipment for household heating needs, are gradually coming to the peak of their use, but in fact, the correct operation of industrial boilers, industrial boilers, no matter now or before, The manufacturer is to ensure that the equipment can run normally during operation.
When the industrial boiler is not in operation, the industrial boiler manufacturer recommends that the user turn off the industrial boiler water valve, the gas valve, the power supply and so on one by one; and during this period, it does not need to drain any boiler or pipeline, but needs Always pay attention to the injection pressure.
In addition, do not arbitrarily change and disassemble the flue of an industrial boiler. If you want to use industrial boilers to provide hot water in summer, you can adjust it to summer mode so that you can only supply hot water without heating, but do not forget to remove the water from the boiler Set the temperature, the water point directly open the hot water use.
Industrial boilers in the non-operating phase of the basic points of these operations, and its operational aspects of the operation have also been introduced, and then look at some of the configuration of industrial boilers, what is humble but often is very important, indispensable.
One is the industrial boiler slag blocking device, so that does not make the slag fall into the grate and extend the stay of slag in the grate on the stay, chain grate slag device to be installed. There is also a tensioning device for the grate of industrial boilers designed to prevent the grate from arching during operation.
Industrial boiler factory pointed out that because the grate must be tight during the operation of the industrial boiler, the tensioning device has become an indispensable accessory. In the case of the chain, the chain relies on the front axle and the rear axle tensions the chain. Generally, the front axle Is adjustable; and beams, scales rely on self-tensioning, making the grate to maintain a stable operation.
